Preparation grinding
Create the cleanliness and surface profile required by the coating or floor-covering specification that follows.
Concrete grinding Brisbane
Concrete grinding can remove nominated surface material, reduce selected high areas or create a profile for a specified coating or floor-covering system. It is not one universal process and does not make every slab perfectly level.
Wirth Floor provides concrete grinding and preparation for selected Brisbane and South East Queensland residential and commercial projects.
Call to discuss the floor, suburb, approximate area, access and what needs to follow.
Method selection
Create the cleanliness and surface profile required by the coating or floor-covering specification that follows.
Remove nominated compatible coatings, paint or adhesive residues after the material, bond and any hazardous-content concern are assessed.
Reduce identified high areas where grinding is suitable. Broader flatness or level changes may require survey, levelling products or other rectification.
Edges, corners, stairs, doorways, fixtures and services can require smaller tools and separate time allowances.
Further refinement can produce a lower-sheen concrete appearance where the slab and intended use suit that finish.
Agree how cleanliness, profile, high areas, residues and visible defects will be inspected before the next contractor or coating stage.
Scope inputs
Hazard boundary
Grinding concrete can create respirable crystalline silica. Current Queensland duties require processing to be controlled and the work assessed and documented as required.
Older tiles, sheet flooring, underlays or mastics may also contain asbestos. Suspected material must be identified and managed before ordinary grinding or removal disturbs it; floor preparation is not a substitute for hazardous-material assessment or licensed removal where required.
Project pathway
Concrete grinding FAQs
No. It can reduce selected high areas. Low areas, broad tolerances, movement or structural issues may need a survey, levelling system or separate repair design.
No. Material type, thickness, bond, hazardous-content risk and the next system influence the safe and suitable method. Test work may be needed.
No. Grinding can expose and clean a defect, but moving or structural cracks require cause assessment and a project-specific repair approach.
No process should be described as literally dust-free. Engineering controls, isolation, cleaning and work practices are selected for the task and site.
That depends on access, noise, silica controls, services, nearby people and operations. Occupied-site staging must be assessed rather than assumed.
Use the acceptance requirements of the next system, including the specified profile, cleanliness, soundness, moisture criteria and documented exclusions.
Talk through the floor
Call with the suburb, approximate area, current layers, access and the next floor system so Wirth Floor can identify the useful next step.
Privacy settings