If you are not sure which service you need, start here. Tell us your suburb, your approximate square metres, what the concrete looks like today, and the result you want. We can discuss a suitable option and the information needed to set clear expectations.
You need the service that matches your end goal. If you want a premium finished surface you usually want polished concrete or epoxy, and if you need the slab corrected or made ready you usually want concrete grinding and floor preparation, and if it mainly looks dirty or stained you may only need concrete cleaning.
Yes. We can guide you through the choices based on your space, your traffic level, and the look you prefer.
Yes. We work on residential and commercial spaces across South East Queensland.
It depends on the job and what information you can provide. A quick call usually gives you a reliable price guide, and some projects need a site visit to confirm the slab and scope.
We need your suburb, approximate square metres, whether the slab is new or existing, what is on the surface now, and the finish you want.
It depends on the season and current workload. If you have a deadline, call early so we can plan it properly.
Yes. Tell us your access limits and deadlines and we will tell you what is realistic.
We service South East Queensland, including Brisbane, Ipswich, Logan, Redlands, Moreton Bay, the Gold Coast, and the Sunshine Coast.
Yes. We service Brisbane wide.
Yes. We service the Gold Coast for suitable jobs.
es. We service the Sunshine Coast for suitable jobs, including Caloundra.
Yes. We regularly service Ipswich and the western growth areas.
Call us and tell us your suburb. We will confirm availability and travel for your job.
Polished concrete is a concrete slab refined through grinding and polishing stages, then protected so it stays easier to clean. The final look is controlled by aggregate exposure and shine level.
Aggregate exposure means how much stone and sand you can see in the finished floor. Lower exposure looks cleaner and more uniform, and higher exposure looks more detailed and patterned.
A cream finish is minimal visible stone. It tends to look clean and modern, with a more uniform surface appearance.
Salt and pepper exposure is a light exposure where fine aggregate becomes visible. It creates a subtle speckled look.
Full exposure shows the most aggregate and has the most visual movement. It is often chosen for a bold architectural look.
Shine level is how reflective the floor is. Common options are matte, satin, semi gloss, and high gloss.
Matte and satin are often easier to live with because they are less reflective and can be more forgiving day to day. The best choice depends on your lighting, traffic, and expectations.
High gloss can show marks and dust more than lower sheen finishes. If you like a crisp reflective look, you will usually want more consistent cleaning.
Yes, in many cases. The right approach depends on slab condition, existing coatings, and how much exposure you want.
Yes, but timing and preparation matter. New slabs need to be suitable and dry enough for the system used, and we confirm this before starting.
Concrete can crack for many reasons. Cracks can often be repaired, but some movement cracks may remain faintly visible depending on how they behave over time.
Yes. We can often fill and repair cracks, and we will explain what the repair will look like in the finished floor.
Sometimes. Colour is usually achieved with stains or dyes, and results depend on the slab and the look you want.
It can be slippery when wet, like most hard floors. Finish choice and the area’s use matter most, especially for entries and wet zones.
Sometimes, but outdoor areas need different slip and exposure considerations. Tell us where it is and how it is used and we will advise.
Concrete grinding is mechanically cutting and refining the surface to remove material, improve flatness, and create the right base. It is often the foundation step for coatings and finishes.
Concrete floor preparation is the work that makes a slab ready for what comes next. It can include grinding, levelling, surface profiling, and removing old materials.
Concrete floor grinding Brisbane is often used to remove high spots, clean up a rough slab, or prepare concrete for coatings like epoxy flooring.
Yes, in many cases. The method depends on the coating type and how strongly it is bonded to the slab.
Yes, in many cases. Glue removal often needs the right tooling and time allowance, especially around edges.
Grinding can reduce high spots and improve flatness. The final outcome depends on how uneven the slab is and what correction level you need.
It can. As you remove surface material, more aggregate may appear, which is why we confirm the goal before starting.
It can be if done poorly. We use dust control methods and equipment to reduce dust and keep the site cleaner.
It should not when the job is set up correctly. We protect nearby areas where needed and manage edges carefully.
Epoxy flooring is a coating system applied to a properly prepared concrete slab. It creates a sealed surface that is easier to clean and helps resist stains and wear.
Yes. Epoxy floors are a popular garage option because they seal the slab and make cleaning easier.
Yes, when the right system is chosen for the traffic and use. The product choice and preparation are what make it last.
Common options include solid colour, decorative flake finishes, and metallic looks. The right option depends on the space and how much visual pattern you want.
It can be slippery when wet if the surface is smooth. Slip control can be added where needed, depending on the area.
Sometimes, but it depends on the condition and adhesion of the existing coating. We confirm the safest approach before coating over anything.
Not usually without the right surface preparation. Coatings need a suitable surface profile to bond properly.
Some systems handle heat and traffic better than others. We choose the coating system based on how you use the space.
It depends on preparation, number of coats, and curing time. We confirm a realistic schedule once we know your slab and finish choice.
It depends on the system and site conditions. We will tell you when foot traffic is safe and when heavier use is safe.
Honed concrete is concrete that has been refined to a smooth, matte or low sheen finish. It sits between a basic grind and a higher shine polished result.
No. Honed concrete is usually lower sheen and stops earlier in the refinement stages, while polished concrete typically goes further to increase clarity and shine.
You would choose honed concrete if you want a refined modern look with low reflection and a smoother feel, without the high gloss look.
Concrete cleaning targets dirt, grime, mould, and staining to improve the look and feel of the surface. The approach depends on whether the concrete is plain, sealed, or polished.
It depends on how deep the stain is and how long it has been there. We can usually improve it and we will set expectations before starting.
Yes. Outdoor concrete often improves a lot once weathering and grime are removed.
Yes. We clean concrete for commercial spaces, entries, warehouses, and back of house areas depending on access and requirements.
Yes, with the right method and products. Polished concrete needs a careful approach to avoid dulling the finish.
Most dullness comes from grit, residue, or the wrong cleaning products. A proper clean and the right ongoing care usually restores a more even look.
Yes. If the surface is already polished and just needs a refresh, cleaning may be the right first step.
Use regular dust removal and a gentle cleaner. Avoid harsh acidic products and avoid abrasive scrubbing pads that can dull the surface.
Keep grit off the surface and clean with a gentle product. Avoid harsh solvents unless you are sure they are compatible with the coating.
Grit and dragging furniture are common causes. Felt pads and regular grit removal help a lot.
Use felt pads and avoid dragging heavy items. For commercial spaces, use appropriate wheels or protective mats where needed.
Yes. Entry mats reduce grit and moisture, which protects almost any floor finish.
Sometimes. The best option depends on the existing finish and what is causing the issue, and we can advise after we inspect or discuss details.
It depends on slab condition, area size, exposure level, and shine level. A quick call lets us give a realistic range for your job.
It depends on what needs to be removed, the grind level required, and access constraints. Preparation and coating removal can change pricing a lot.
It depends on preparation, system thickness, finish choice, and curing requirements. The fastest way to get a reliable guide is a quick call about your slab.
Concrete varies a lot from site to site. Condition, coatings, repairs, edges, and access can change the time and tooling required, which changes cost.
Often yes for a guide price, if you can provide square metres, photos, and a clear goal. Some jobs need a site visit to confirm slab condition and risks.
Yes. Tell us your stage, timeline, and access, and we will plan around the build schedule.
Yes. Staged work is common for larger projects and commercial sites.
Yes. The main requirement is clear access and correct sequencing so the floor is not damaged after it is finished.
Clear loose items, provide access, and tell us about any site rules or constraints. If it is commercial, tell us about operating hours and safety requirements.
Often yes. If your site has restrictions, tell us early so we can plan.
Most dullness comes from grit, residue, or the wrong cleaning products. A proper clean and the right ongoing care usually restores a more even look.
Yes. If the surface is already polished and just needs a refresh, cleaning may be the right first step.
Call now and tell us your suburb, approximate square metres, and the result you want. We will discuss a suitable service for the slab and the next step.
Privacy settings