0431 808 876Call

Finish choices, clear from the start

Polished concrete Brisbane

WIRTHFLOOR provides polished concrete for Brisbane homes and commercial interiors. We assess the slab, discuss aggregate exposure and sheen, and plan the grinding and polishing around its condition. Call 0431 808 876 with your suburb, floor area and photos to discuss the finish and a project-specific quote.

New slab or renovation? Start with the floor you have.

Finish brief

What will your polished concrete look like?

Cream or surface finish

Retains more of the original slab surface. It generally relies on suitable placement, finish and flatness because deeper grinding is not used to change every variation.

Partial exposure

Reveals a salt-and-pepper or partly exposed aggregate pattern. Distribution can vary with the original placement and grinding depth.

Greater exposure

Deeper grinding reveals more aggregate and can also reveal repairs, holes, edges and differences across the slab.

Lower sheen

Produces less reflection while retaining the character of the refined concrete. Maintenance and traffic still influence appearance.

Higher sheen

Uses further refinement stages for more reflection. Lighting, flatness, scratches and cleaning can become more visually apparent.

Project sample

Photographs and samples guide a finish category but cannot make one slab reproduce another slab's exact colour or aggregate pattern.

Slab assessment

Can your existing slab be polished?

  • New or existing concrete and placement history
  • Cracks, weak areas, holes, contamination and repairs
  • Flatness and aggregate distribution
  • Previous coatings, adhesives or floor coverings
  • Walls, stairs, fixtures, doorways and edge access
  • Traffic, expected spills, cleaning and appearance
  • Other trades, protection and available programme

Plan the scope

What changes the cost and timing?

Two floors with the same area can need different work. An open new slab may have fewer edges than an occupied renovation with cabinetry and doorways. Existing coatings, patches and the amount of aggregate exposure also change the preparation and refinement involved.

A useful quote records the agreed exposure and sheen, repair treatment, edge work, access and protection between trades. Share close-up photos as well as a wide view of each room. Include your target dates so the proposed work can be discussed alongside the rest of the project.

Project pathway

From brief to handover

  1. Share the siteProvide the area, use, photos and finish direction.
  2. Assess the slabReview visible condition, access, edges and existing treatments.
  3. Agree the finishRecord exposure, sheen, repairs, inclusions and natural variation.
  4. Refine the concreteComplete the preparation and polishing stages in the written scope.
  5. HandoverConfirm access restrictions and compatible care guidance.

Safety boundary

Concrete polishing requires controlled silica processing

Grinding and abrasive polishing silica-containing concrete can create respirable crystalline silica. Workplace Health and Safety Queensland states that processing crystalline silica substances must be controlled, with the risk assessment and additional duties determined for the work.

Site access, isolation, engineering controls, cleaning and any occupied-area staging should therefore form part of the project plan rather than being covered by a “dust-free” promise.

Polished concrete FAQs

Questions to settle before work starts

What affects the cost of polished concrete?

The quote depends on floor area, slab condition, existing coverings, repairs, aggregate exposure, polishing stages, edges and access. Send the suburb, approximate area and photos so the proposed finish and preparation can be assessed together.

Can every existing slab be polished?

No. Condition, contaminants, repairs, thickness, flatness, aggregate and access need assessment. Some floors require preparation, another finish or a more limited result.

Will exposure be uniform everywhere?

Not necessarily. Aggregate distribution and slab flatness vary. Edge zones, patches and previous work can look different from open areas.

Can cracks be made invisible?

No reliable promise can be made. Repair colour and texture can remain visible, and moving cracks may reopen unless their cause is addressed.

Is polished concrete automatically slip-resistant?

No. The completed surface, contaminants, footwear, cleaning and wet or dry conditions affect performance. Any project-specific classification must be identified and evidenced.

How long will the work take?

Area, slab condition, repairs, exposure, refinement stages, edges, access and protection determine the programme. A site-specific schedule follows assessment.

How should the floor be maintained?

Use compatible cleaning guidance provided for the completed system. Manage grit and spills, and assess local wear before applying another treatment.

Discuss your floor

Request a polished concrete quote

Tell us the suburb, approximate floor area and whether the slab is new or existing. Include the exposure and sheen you prefer, access and timing so we can discuss the next step.

Not sure what the slab needs? Describe its current condition in the message. A site assessment may be needed before the scope can be confirmed.

Call 0431 808 876






    By sending this form, you ask Wirth Floor to use your details to respond to the enquiry. Read the Website Privacy Notice. Do not include payment details or sensitive documents.

    Talk through the floor

    Discuss the slab and the finish direction

    Call with the suburb, approximate area, current floor condition and preferred finish so Wirth Floor can identify the useful next step.

    Call Wirth Floor0431 808 876